Ravelli XB

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Teorema XB is a numerical control machine with a robust bridge structure, ensuring speed, precision and minimum tool wear. The fact that there is easy access to the work table reduces the time required to move the pieces of stone. Safe, powerful, practical, highly technological, easy to use and maintain, available with 3, 4 or 5 axes (with lathe).

Pictures

Технически характеристики

XB TECHNICAL DATA
Stroke of X axis 3.400 mm / 126”
Stroke of Y axis 2.000 mm / 79”
Stroke of Z axis 500/700 mm – 19”/28”
Rotation of C axis (for 4th axis) 360°
Rotation of A axis (for 5th lathe axis) 360°
Inclination of W axis (for 4th or 5th or 6th axis) ±5°
Spindle power 13kW 17Hp
Technical information and illustrations are indicative. The manufacturer reserves the right to alter them without notice, even while the order is in progress.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Terzago Rapida Bridge saw machine

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player


Bridge saw machine with main parts built in cast iron, supplied with a PLC of easy and intuitive use to program slabs cutting and cuts and movement. It is possible to execute linear shaping. Manual table rotation and head tilting.

Pictures

Технически характеристики

Blade stroke mm 3600
Blade vertical stroke mm 400
Bridge translation mm 3600
Blade diameter (marble) mm 725
Blade diameter (granite) mm 450
Cutting depht (marble) mm 250
Cutting depht (granite) mm 115
Blade holder shaft diameter mm 50
Blade block flange diameter mm 210
Dimensions of the cast iron table mm 1500x3000
Maximum power of the blade motor kW 22
Mandrel rotation speed at 50 Hz rpm 1435
Adjustable cut speed m/min 0-17
Machine weight Kg 4200
Packing volume mc 14
Machine dimensions mm 5000x5500x2600

N° 2 Columns
N° 1 Photoelectric cell safety barrier

Laser beam
Hydraulic tilting table
Table studs
Removable wooden table cover
Blade speed inverter > 22 kW

 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

Bellani COMET

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player


The “COMET” machine has been designed and built for the manufacturing of:
Edge and bevel polishing;
Upper rim gauging;
Drip milling.

COMET is a “MODULAR” machine because all its parts are interchangeable. The machine meets the different needs of the operator and is suitable for the processing of granite or marble slabs and blocks of a thickness varying from 20 mm to 60 mm. The COMET machine is really unique in its kind. Its performance makes it useful also in funeral art.

Pictures


Technical specifications

WORKING DETAILS

Usefulworking lenght no limit
Usefulworking width 1200 mm
Max.working width 3000 mm
Min.working width 200 mm
Workablethickness 20-60 mm
TECHNICALDETAILS

Usefulworking lenght no limit
Usefulworking width 1200 mm
Max.working width 3000 mm
Min.working width 200 mm
Workablethickness 20-60 mm

Lenght 5550mm
WIdth 1950mm
Heightof the machine 1600 mm
Heightof working table 960 mm
Weight 5 ton
Totalinstalled power 42 Kw

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fickert + Winterling

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player


Automatic Grinding and Polishing Machine ASP 206

Leave the responsibility to the machine. It will produce the best results by following its own programme. 24 hours a day.

Precision stone working.
Flexibility in the production process.
Operational safety.
Minimal labour input

Pictures

Technology at a glance


Grey cast iron grinding carriage on circular slide bearings for precise, low-wear stone-work.
Bridge guide on rollers for exact positioning.
Change of grinding heads at more than 20 m/min, up to 20 grinding heads can be used, ie. optimum utilisation and time savings.
Pneumatic lock-in of grinding head. Denture clutch. Safety lock. No safety hazards - even during power failures.
Rheostatically adjustable grinding pressure, programmable per slab job - better customising for different types of materials.
Cost-efficient recognition of stone position and profile by means of coordinate system, Teach-In-system.
Programmable for 25 projects per grinding path - providing potential for small projects, too.
1-10 project prioritisation for ready response to urgent or extra orders.
4 grinding programmes: frame, N, Z, zigzag - the right technique for every material.
Grinding spindle with automatic lowering system to protect the material and adjustable stop.
Automatic adaptation of the bridge speed in the zigzag programme guarantees uniform grinding overlap.

 

Vacuum Pressure Blasting Machine

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player



Abrasive recycling system by vacuum aspirator;
Sandblasting unit having a capacity of liter 24;
Pressure reducer for the compressed air which supplies the sandblasting machine;
Sandblasting and suction hoses - Lenght mt. 4;
Brush head complete with Widia Nozzle diameter mm 4;

Pictures

Lenght: mt. 0,53;
Width: mt. 0,53;
Height: mt. 1,7;
Weight: kg. 83;
Voltage: 220 V Monophase;
Power: 1200 Watt;
Compressed air consumption at 7 bar: 850-1200 Lt./minute;
Time of sandblasting surface: 25-30 minutes;
Width of sandblasting surface: mm 35-40;
Time fall regenerated abrasive: 20-30 sec.;
Raccomended Abrasive: Aluminum Oxide - grain 40-80